compiling in a Mac
Posted: 11 Oct 2017, 21:50
Hi,
I am trying to compile Elmer in a Mac with OS 10.12 Sierra and I have gcc6 installed via MacPorts.
I have run cmake after setting
export FC=gfortran-mp-6
export CXX=g++-mp-6
and cmake and make install have run without problems or compilation errors.
But when I run ctest I get
0% tests passed, 449 tests failed out of 449
where the 449 test give the same error as shown here.
Start 449: vortex3d
449/449 Test #449: vortex3d ................................................***Exception: Other 0.02 sec
449 - vortex3d (OTHER_FAULT)
If I try to run /Users/bbeltran/work/elmer/install/bin/ElmerSolver is get the following error
Bertas-MacBook:bin bbeltran$ ./ElmerSolver
ELMER SOLVER (v 8.3) STARTED AT: 2017/10/11 12:49:36
ParCommInit: Initialize #PEs: 1
MAIN:
MAIN: =============================================================
MAIN: ElmerSolver finite element software, Welcome!
MAIN: This program is free software licensed under (L)GPL
MAIN: Copyright 1st April 1995 - , CSC - IT Center for Science Ltd.
MAIN: Webpage http://www.csc.fi/elmer, Email elmeradm@csc.fi
MAIN: Version: 8.3 (Rev: caaf6907, Compiled: 2017-10-11)
MAIN: =============================================================
ERROR:: InitializeElementDescriptions: elements.def not found
Any suggestion ?
Thanks
Berta
I am trying to compile Elmer in a Mac with OS 10.12 Sierra and I have gcc6 installed via MacPorts.
I have run cmake after setting
export FC=gfortran-mp-6
export CXX=g++-mp-6
and cmake and make install have run without problems or compilation errors.
But when I run ctest I get
0% tests passed, 449 tests failed out of 449
where the 449 test give the same error as shown here.
Start 449: vortex3d
449/449 Test #449: vortex3d ................................................***Exception: Other 0.02 sec
449 - vortex3d (OTHER_FAULT)
If I try to run /Users/bbeltran/work/elmer/install/bin/ElmerSolver is get the following error
Bertas-MacBook:bin bbeltran$ ./ElmerSolver
ELMER SOLVER (v 8.3) STARTED AT: 2017/10/11 12:49:36
ParCommInit: Initialize #PEs: 1
MAIN:
MAIN: =============================================================
MAIN: ElmerSolver finite element software, Welcome!
MAIN: This program is free software licensed under (L)GPL
MAIN: Copyright 1st April 1995 - , CSC - IT Center for Science Ltd.
MAIN: Webpage http://www.csc.fi/elmer, Email elmeradm@csc.fi
MAIN: Version: 8.3 (Rev: caaf6907, Compiled: 2017-10-11)
MAIN: =============================================================
ERROR:: InitializeElementDescriptions: elements.def not found
Any suggestion ?
Thanks
Berta