./ResultOutputSolve.so: cannot open shared object file: No s

Discussion about building and installing Elmer

./ResultOutputSolve.so: cannot open shared object file: No s

Postby Estiivan » 24 Nov 2016, 10:46

Hello all,

I am trying to solve first tutorial problem (geoslab) but I encounter following problem. I think the path in red in Solver log (below) is just wrong as ResultOutputSolve.so is actually located in /elmer/install/share/elmersolver/lib but where should I make the change? Operating system is Ubuntu 16.04.

Thank you all!

I have in .bashrc as follows:

export ELMER_HOME=$HOME/elmer/install/
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$ELMER_HOME/lib
export PATH=$PATH:$ELMER_HOME/bin

Here is Solver log:

ELMER SOLVER (v 8.2) STARTED AT: 2016/11/23 19:07:50
ParCommInit: Initialize #PEs: 1
MAIN:
MAIN: =============================================================
MAIN: ElmerSolver finite element software, Welcome!
MAIN: This program is free software licensed under (L)GPL
MAIN: Copyright 1st April 1995 - , CSC - IT Center for Science Ltd.
MAIN: Webpage http://www.csc.fi/elmer, Email elmeradm@csc.fi
MAIN: Version: 8.2 (Rev: unknown, Compiled: 2016-11-11)
MAIN: =============================================================
MAIN:
MAIN:
MAIN: -------------------------------------
MAIN: Reading Model: case.sif
LoadInputFile: Scanning input file: case.sif
LoadInputFile: Loading input file: case.sif
WARNING:: LoadInputFile: > Material 1 < not used in any Body!
Loading user function library: [HeatSolve]...[HeatSolver_Init0]
LoadMesh: Base mesh name: ./.
LoadMesh: Elapsed time (CPU,REAL): 0.0040 0.0009 (s)
MAIN: -------------------------------------
AddVtuOutputSolverHack: Adding ResultOutputSolver to write VTU output in file: case
Loading user function library: [HeatSolve]...[HeatSolver_Init]
Loading user function library: [HeatSolve]...[HeatSolver_bulk]
Loading user function library: [HeatSolve]...[HeatSolver]
OptimizeBandwidth: ---------------------------------------------------------
OptimizeBandwidth: Computing matrix structure for: heat equation...done.
OptimizeBandwidth: Half bandwidth without optimization: 5
OptimizeBandwidth:
OptimizeBandwidth: Bandwidth Optimization ...done.
OptimizeBandwidth: Half bandwidth after optimization: 6
OptimizeBandwidth: Bandwidth optimization rejected, using original ordering.
OptimizeBandwidth: ---------------------------------------------------------
Loading user function library: [ResultOutputSolve]...[ResultOutputSolver_Init]
ResultOutputSolve: cannot open shared object file: No such file or directory
ResultOutputSolve.so: cannot open shared object file: No such file or directory
./ResultOutputSolve: cannot open shared object file: No such file or directory
./ResultOutputSolve.so: cannot open shared object file: No such file or directory
/home/elmer/elmer/install//share/elmersolver/lib/ResultOutputSolve: cannot open shared object file: No such file or directory
libmpi_stubs.so: cannot open shared object file: No such file or directory
Estiivan
 
Posts: 25
Joined: 14 Nov 2016, 14:06

Re: ./ResultOutputSolve.so: cannot open shared object file: No s

Postby annier » 24 Nov 2016, 16:11

Hi Estiivan,
Estiivan wrote:I have in .bashrc as follows:
export ELMER_HOME=$HOME/elmer/install/
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$ELMER_HOME/lib
export PATH=$PATH:$ELMER_HOME/bin

Did you try as expressed here?
viewtopic.php?f=2&t=4243&start=10

Try specifying LD_LIBRARY_PATH more particularly to the /elmersolver directory as following in the bash file
Code: Select all
export ELMER_HOME=$HOME/elmer/install/
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$ELMER_HOME/lib/elmersolver
export PATH=$PATH:$ELMER_HOME/bin


Yours Sincerely,
Anil Kunwar
annier
 
Posts: 1034
Joined: 27 Aug 2013, 13:51

Re: ./ResultOutputSolve.so: cannot open shared object file: No s

Postby Estiivan » 24 Nov 2016, 17:35

Hello Annier,

I saw that thread and put as you suggested to .bashrc but what happens then is that everything just crashes:
Program received signal SIGSEGV: Segmentation fault - invalid memory reference.

I have Ubuntu 16.04 LTS on Dell computer with Intel Xeon CPU E5-1620 v3 @ 3.50 GHz x 8, 64 bit.

With regards,
Estiivan


ELMER SOLVER (v 8.2) STARTED AT: 2016/11/24 16:29:33
ParCommInit: Initialize #PEs: 1
MAIN:
MAIN: =============================================================
MAIN: ElmerSolver finite element software, Welcome!
MAIN: This program is free software licensed under (L)GPL
MAIN: Copyright 1st April 1995 - , CSC - IT Center for Science Ltd.
MAIN: Webpage http://www.csc.fi/elmer, Email elmeradm@csc.fi
MAIN: Version: 8.2 (Rev: f8bd4fd, Compiled: 2016-11-23)
MAIN: =============================================================
MAIN:
MAIN:
MAIN: -------------------------------------
MAIN: Reading Model: case.sif
LoadInputFile: Scanning input file: case.sif
LoadInputFile: Loading input file: case.sif
WARNING:: LoadInputFile: > Material 1 < not used in any Body!
Loading user function library: [HeatSolve]...[HeatSolver_Init0]
LoadMesh: Base mesh name: ./.
LoadMesh: Elapsed time (CPU,REAL): 0.0040 0.0011 (s)
MAIN: -------------------------------------
AddVtuOutputSolverHack: Adding ResultOutputSolver to write VTU output in file: case
Loading user function library: [HeatSolve]...[HeatSolver_Init]
Loading user function library: [HeatSolve]...[HeatSolver_bulk]
Loading user function library: [HeatSolve]...[HeatSolver]
OptimizeBandwidth: ---------------------------------------------------------
OptimizeBandwidth: Computing matrix structure for: heat equation...done.
OptimizeBandwidth: Half bandwidth without optimization: 5
OptimizeBandwidth:
OptimizeBandwidth: Bandwidth Optimization ...done.
OptimizeBandwidth: Half bandwidth after optimization: 6
OptimizeBandwidth: Bandwidth optimization rejected, using original ordering.
OptimizeBandwidth: ---------------------------------------------------------
Loading user function library: [ResultOutputSolve]...[ResultOutputSolver_Init]
Loading user function library: [ResultOutputSolve]...[ResultOutputSolver_bulk]
Loading user function library: [ResultOutputSolve]...[ResultOutputSolver]
MAIN:
MAIN: -------------------------------------
MAIN: Steady state iteration: 1
MAIN: -------------------------------------
MAIN:
SingleSolver: Attempting to call solver
SingleSolver: Solver Equation string is: heat equation
HeatSolve:
HeatSolve:
HeatSolve: -------------------------------------
HeatSolve: TEMPERATURE ITERATION 1
HeatSolve: -------------------------------------
HeatSolve:
HeatSolve: Starting Assembly...
HeatSolve: Assembly:

Program received signal SIGSEGV: Segmentation fault - invalid memory reference.

Backtrace for this error:
#0 0x7F4125CB8E08
#1 0x7F4125CB7F90
#2 0x7F41259094AF
#3 0x7F412364DA68
#4 0x7F41261991CE
#5 0x7F41261A9B21
#6 0x7F41261AAD7A
#7 0x7F41261AD828
#8 0x7F412634611B
#9 0x7F412634B1E7
#10 0x4010D5 in MAIN__ at Solver.F90:?
Estiivan
 
Posts: 25
Joined: 14 Nov 2016, 14:06

Re: ./ResultOutputSolve.so: cannot open shared object file: No s

Postby annier » 25 Nov 2016, 08:05

Hi Estiivan,
Could you please report on running simple tests available in elmerfem/fem/tests directory?


Yours Sincerely,
Anil Kunwar
annier
 
Posts: 1034
Joined: 27 Aug 2013, 13:51

Re: ./ResultOutputSolve.so: cannot open shared object file: No s

Postby Estiivan » 25 Nov 2016, 16:50

Hi Annier,

I took random tests (is there a an easy way to do them all without having to write name of each test separately?) and there was one failure. See below. Is this informative?

With regards,
Estiivan


elmer@Precision-Tower-5810:~/elmer/build$ ctest -R heateq
Test project /home/elmer/elmer/build
Start 4: heateq_bdf2
1/10 Test #4: heateq_bdf2 ...................... Passed 0.22 sec
Start 11: heateq_resmode
2/10 Test #11: heateq_resmode ................... Passed 0.73 sec
Start 73: heateq_newmark_global
3/10 Test #73: heateq_newmark_global ............ Passed 0.12 sec
Start 99: heateq-par
4/10 Test #99: heateq-par ....................... Passed 0.14 sec
Start 100: heateq_bdf3
5/10 Test #100: heateq_bdf3 ...................... Passed 0.23 sec
Start 147: heateq
6/10 Test #147: heateq ...........................***Failed 0.01 sec

Start 198: heateq_infty
7/10 Test #198: heateq_infty ..................... Passed 1.67 sec
Start 251: heateq_steady_start
8/10 Test #251: heateq_steady_start .............. Passed 0.24 sec
Start 252: heateq_spline_table
9/10 Test #252: heateq_spline_table .............. Passed 0.66 sec
Start 260: heateq_newmark
10/10 Test #260: heateq_newmark ................... Passed 0.17 sec

90% tests passed, 1 tests failed out of 10

Label Time Summary:
heateq = 1.67 sec (1 test)
quick = 2.52 sec (9 tests)
serial = 4.19 sec (10 tests)

Total Test time (real) = 4.26 sec

The following tests FAILED:
147 - heateq (Failed)
Errors while running CTest
elmer@Precision-Tower-5810:~/elmer/build$ ctest -R heateq_bdf2
Test project /home/elmer/elmer/build
Start 4: heateq_bdf2
1/1 Test #4: heateq_bdf2 ...................... Passed 0.22 sec

100% tests passed, 0 tests failed out of 1

Label Time Summary:
quick = 0.22 sec (1 test)
serial = 0.22 sec (1 test)

Total Test time (real) = 0.29 sec
elmer@Precision-Tower-5810:~/elmer/build$ ctest -R heateq_bdf3
Test project /home/elmer/elmer/build
Start 100: heateq_bdf3
1/1 Test #100: heateq_bdf3 ...................... Passed 0.25 sec

100% tests passed, 0 tests failed out of 1

Label Time Summary:
quick = 0.25 sec (1 test)
serial = 0.25 sec (1 test)

Total Test time (real) = 0.32 sec
elmer@Precision-Tower-5810:~/elmer/build$ ctest -R heateq_bdf3
Test project /home/elmer/elmer/build
Start 100: heateq_bdf3
1/1 Test #100: heateq_bdf3 ...................... Passed 0.21 sec

100% tests passed, 0 tests failed out of 1

Label Time Summary:
quick = 0.21 sec (1 test)
serial = 0.21 sec (1 test)

Total Test time (real) = 0.28 sec
elmer@Precision-Tower-5810:~/elmer/build$ ctest -R StressEigen
Test project /home/elmer/elmer/build
Start 31: StressEigen
1/2 Test #31: StressEigen ...................... Passed 0.49 sec
Start 277: StressEigen3D
2/2 Test #277: StressEigen3D .................... Passed 10.34 sec

100% tests passed, 0 tests failed out of 2

Label Time Summary:
quick = 0.49 sec (1 test)
serial = 10.84 sec (2 tests)

Total Test time (real) = 10.91 sec
elmer@Precision-Tower-5810:~/elmer/build$ ctest -R heateq_steady_start
Test project /home/elmer/elmer/build
Start 251: heateq_steady_start
1/1 Test #251: heateq_steady_start .............. Passed 0.23 sec

100% tests passed, 0 tests failed out of 1

Label Time Summary:
quick = 0.23 sec (1 test)
serial = 0.23 sec (1 test)

Total Test time (real) = 0.30 sec
elmer@Precision-Tower-5810:~/elmer/build$
Estiivan
 
Posts: 25
Joined: 14 Nov 2016, 14:06

Re: ./ResultOutputSolve.so: cannot open shared object file: No s

Postby raback » 25 Nov 2016, 17:38

Hi

All tests:
Code: Select all
>ctest


All tests using 2 cores:
Code: Select all
>ctest -j 2


Just the tests with label "quick":
Code: Select all
>ctest -L quick

-Peter
raback
Site Admin
 
Posts: 3111
Joined: 22 Aug 2009, 11:57
Location: Espoo, Finland

Re: ./ResultOutputSolve.so: cannot open shared object file: No s

Postby Estiivan » 28 Nov 2016, 10:47

Hello all,

Giving just ctest all the tests went through. I try to install Elmer on different Ubuntu machine and see if problem occurs again.

With regards,
Estiivan


elmer@Precision-Tower-5810:~/elmer/build$ ctest
Test project /home/elmer/elmer/build
Start 1: AdvDiffFCT
1/403 Test #1: AdvDiffFCT ......................... Passed 6.22 sec
Start 2: normals
2/403 Test #2: normals ............................ Passed 0.08 sec
Start 3: BlockPoisson1
3/403 Test #3: BlockPoisson1 ...................... Passed 0.08 sec
Start 4: heateq_bdf2
4/403 Test #4: heateq_bdf2 ........................ Passed 0.19 sec
Start 5: mgdyn_nodalforce2d
5/403 Test #5: mgdyn_nodalforce2d ................. Passed 0.36 sec
Start 6: StrainCalculation01
6/403 Test #6: StrainCalculation01 ................ Passed 0.29 sec
Start 7: LimitDisplacement3
7/403 Test #7: LimitDisplacement3 ................. Passed 1.25 sec
Start 8: SecondOrderEdgeElement2D
8/403 Test #8: SecondOrderEdgeElement2D ........... Passed 0.52 sec
Start 9: ContactBlunt2Dresmode
9/403 Test #9: ContactBlunt2Dresmode .............. Passed 2.58 sec
Start 10: cmultg
10/403 Test #10: cmultg ............................. Passed 2.79 sec
Start 11: heateq_resmode
11/403 Test #11: heateq_resmode ..................... Passed 0.64 sec
Start 12: fsi_beam_optimize
12/403 Test #12: fsi_beam_optimize .................. Passed 3.24 sec
Start 13: AdvDiffHandles
13/403 Test #13: AdvDiffHandles ..................... Passed 0.18 sec
Start 14: ConstantBCTemperature
14/403 Test #14: ConstantBCTemperature .............. Passed 0.15 sec
Start 15: CoordinateScaling
15/403 Test #15: CoordinateScaling .................. Passed 0.09 sec
Start 16: amultg2
16/403 Test #16: amultg2 ............................ Passed 0.29 sec
Start 17: pmultg
17/403 Test #17: pmultg ............................. Passed 0.71 sec
Start 18: FixPotentialLevels
18/403 Test #18: FixPotentialLevels ................. Passed 0.11 sec
Start 19: ContactFriction
19/403 Test #19: ContactFriction .................... Passed 0.71 sec
Start 20: ArteryOutlet
20/403 Test #20: ArteryOutlet ....................... Passed 5.56 sec
Start 21: ContactPatch2Dtwo
21/403 Test #21: ContactPatch2Dtwo .................. Passed 0.15 sec
Start 22: ExtrudedMesh3
22/403 Test #22: ExtrudedMesh3 ...................... Passed 0.25 sec
Start 23: PoissonBoltzmann
23/403 Test #23: PoissonBoltzmann ................... Passed 2.28 sec
Start 24: AdvReactDG_P
24/403 Test #24: AdvReactDG_P ....................... Passed 0.32 sec
Start 25: rgdblock
25/403 Test #25: rgdblock ........................... Passed 1.07 sec
Start 26: linearsolvers
26/403 Test #26: linearsolvers ...................... Passed 0.29 sec
Start 27: ThermalBiMetal
27/403 Test #27: ThermalBiMetal ..................... Passed 0.19 sec
Start 28: InductionHeating2
28/403 Test #28: InductionHeating2 .................. Passed 0.48 sec
Start 29: pointdir
29/403 Test #29: pointdir ........................... Passed 0.10 sec
Start 30: RotatingBCPoisson2D
30/403 Test #30: RotatingBCPoisson2D ................ Passed 1.40 sec
Start 31: StressEigen
31/403 Test #31: StressEigen ........................ Passed 0.48 sec
Start 32: HeatAndDiffusion
32/403 Test #32: HeatAndDiffusion ................... Passed 0.36 sec
Start 33: NaturalConvection
33/403 Test #33: NaturalConvection .................. Passed 3.32 sec
Start 34: mgdyn2D_em_harmonic
34/403 Test #34: mgdyn2D_em_harmonic ................ Passed 0.63 sec
Start 35: ThermoElectric
35/403 Test #35: ThermoElectric ..................... Passed 0.17 sec
Start 36: ContactBlunt2D
36/403 Test #36: ContactBlunt2D ..................... Passed 2.96 sec
Start 37: InductionHeating
37/403 Test #37: InductionHeating ................... Passed 0.34 sec
Start 38: CoilSolverLoop
38/403 Test #38: CoilSolverLoop ..................... Passed 0.30 sec
Start 39: BlockLinElast2
39/403 Test #39: BlockLinElast2 ..................... Passed 0.16 sec
Start 40: adaptivity4
40/403 Test #40: adaptivity4 ........................ Passed 0.21 sec
Start 41: levelset3
41/403 Test #41: levelset3 .......................... Passed 3.83 sec
Start 42: current
42/403 Test #42: current ............................ Passed 0.21 sec
Start 43: ThermalPipe3D
43/403 Test #43: ThermalPipe3D ...................... Passed 1.84 sec
Start 44: adv_diff1
44/403 Test #44: adv_diff1 .......................... Passed 0.39 sec
Start 45: TimeAdapt
45/403 Test #45: TimeAdapt .......................... Passed 2.17 sec
Start 46: adaptivity1
46/403 Test #46: adaptivity1 ........................ Passed 0.23 sec
Start 47: OdeSolver2ndOrder
47/403 Test #47: OdeSolver2ndOrder .................. Passed 0.07 sec
Start 48: StrainCalculation03
48/403 Test #48: StrainCalculation03 ................ Passed 2.80 sec
Start 49: CylComStruct
49/403 Test #49: CylComStruct ....................... Passed 0.76 sec
Start 50: fsi_box2
50/403 Test #50: fsi_box2 ........................... Passed 0.82 sec
Start 51: radiation3d
51/403 Test #51: radiation3d ........................ Passed 5.97 sec
Start 52: CoilSolverTwoLoops
52/403 Test #52: CoilSolverTwoLoops ................. Passed 0.65 sec
Start 53: ParticleAdvector
53/403 Test #53: ParticleAdvector ................... Passed 1.18 sec
Start 54: diffuser_sa
54/403 Test #54: diffuser_sa ........................ Passed 4.72 sec
Start 55: staged_sim
55/403 Test #55: staged_sim ......................... Passed 0.88 sec
Start 56: LinearSystemNamespace
56/403 Test #56: LinearSystemNamespace .............. Passed 0.14 sec
Start 57: bodyload
57/403 Test #57: bodyload ........................... Passed 0.09 sec
Start 58: DisContBoundaryMortarCont
58/403 Test #58: DisContBoundaryMortarCont .......... Passed 0.08 sec
Start 59: vortex2d
59/403 Test #59: vortex2d ........................... Passed 0.64 sec
Start 60: PoissonBEM
60/403 Test #60: PoissonBEM ......................... Passed 0.16 sec
Start 61: WaveEquEigen
61/403 Test #61: WaveEquEigen ....................... Passed 0.12 sec
Start 62: NormalTangentialDisplacement2
62/403 Test #62: NormalTangentialDisplacement2 ...... Passed 0.19 sec
Start 63: BlockPoisson3
63/403 Test #63: BlockPoisson3 ...................... Passed 0.28 sec
Start 64: streamlines
64/403 Test #64: streamlines ........................ Passed 0.31 sec
Start 65: RotatingHT2D
65/403 Test #65: RotatingHT2D ....................... Passed 1.25 sec
Start 66: diffuser_v2f
66/403 Test #66: diffuser_v2f ....................... Passed 7.25 sec
Start 67: PhaseChange
67/403 Test #67: PhaseChange ........................ Passed 2.56 sec
Start 68: OptimizeSimplexFourHeaters
68/403 Test #68: OptimizeSimplexFourHeaters ......... Passed 3.02 sec
Start 69: diffuser_sst
69/403 Test #69: diffuser_sst ....................... Passed 3.38 sec
Start 70: ParticleAdvector2
70/403 Test #70: ParticleAdvector2 .................. Passed 1.99 sec
Start 71: AnalyticalTest
71/403 Test #71: AnalyticalTest ..................... Passed 0.13 sec
Start 72: StrainCalculation02
72/403 Test #72: StrainCalculation02 ................ Passed 3.15 sec
Start 73: heateq_newmark_global
73/403 Test #73: heateq_newmark_global .............. Passed 0.14 sec
Start 74: fluxsolver3
74/403 Test #74: fluxsolver3 ........................ Passed 0.25 sec
Start 75: BDM3D
75/403 Test #75: BDM3D .............................. Passed 1.67 sec
Start 76: ContactPatch2DntQuadratic
76/403 Test #76: ContactPatch2DntQuadratic .......... Passed 0.19 sec
Start 77: NtCartesianBC
77/403 Test #77: NtCartesianBC ...................... Passed 3.00 sec
Start 78: CoupledPoisson1
78/403 Test #78: CoupledPoisson1 .................... Passed 0.13 sec
Start 79: CoilSolver2
79/403 Test #79: CoilSolver2 ........................ Passed 0.27 sec
Start 80: StressConstraintModes
80/403 Test #80: StressConstraintModes .............. Passed 0.18 sec
Start 81: AdvDiffHandles2
81/403 Test #81: AdvDiffHandles2 .................... Passed 0.63 sec
Start 82: freesurf_int
82/403 Test #82: freesurf_int ....................... Passed 0.58 sec
Start 83: reload
83/403 Test #83: reload ............................. Passed 0.52 sec
Start 84: radiation2
84/403 Test #84: radiation2 ......................... Passed 0.20 sec
Start 85: EdgeElementInterpolation
85/403 Test #85: EdgeElementInterpolation ........... Passed 1.11 sec
Start 86: RichardsDyke
86/403 Test #86: RichardsDyke ....................... Passed 3.23 sec
Start 87: ContactBlunt2Djump
87/403 Test #87: ContactBlunt2Djump ................. Passed 6.33 sec
Start 88: CylComAxi
88/403 Test #88: CylComAxi .......................... Passed 0.54 sec
Start 89: ContactFrictionNonlin
89/403 Test #89: ContactFrictionNonlin .............. Passed 1.00 sec
Start 90: DisContBoundaryMortarJumpB
90/403 Test #90: DisContBoundaryMortarJumpB ......... Passed 0.09 sec
Start 91: levelset1
91/403 Test #91: levelset1 .......................... Passed 2.58 sec
Start 92: reynolds3
92/403 Test #92: reynolds3 .......................... Passed 2.10 sec
Start 93: fsi_beam
93/403 Test #93: fsi_beam ........................... Passed 0.98 sec
Start 94: reynolds3b
94/403 Test #94: reynolds3b ......................... Passed 2.13 sec
Start 95: ContactPatch2D
95/403 Test #95: ContactPatch2D ..................... Passed 0.09 sec
Start 96: DirichletNeumannSlave
96/403 Test #96: DirichletNeumannSlave .............. Passed 0.12 sec
Start 97: coating
97/403 Test #97: coating ............................ Passed 1.76 sec
Start 98: ParStokes_ISMIP_HOM_A010
98/403 Test #98: ParStokes_ISMIP_HOM_A010 ........... Passed 157.74 sec
Start 99: heateq-par
99/403 Test #99: heateq-par ......................... Passed 0.15 sec
Start 100: heateq_bdf3
100/403 Test #100: heateq_bdf3 ........................ Passed 0.26 sec
Start 101: ElastPelem
101/403 Test #101: ElastPelem ......................... Passed 2.76 sec
Start 102: FlowResSlip
102/403 Test #102: FlowResSlip ........................ Passed 4.54 sec
Start 103: bodydir2
103/403 Test #103: bodydir2 ........................... Passed 1.99 sec
Start 104: ParticleFalling
104/403 Test #104: ParticleFalling .................... Passed 0.21 sec
Start 105: elstat_source
105/403 Test #105: elstat_source ...................... Passed 0.11 sec
Start 106: LimitTemperature
106/403 Test #106: LimitTemperature ................... Passed 7.23 sec
Start 107: fsi_box
107/403 Test #107: fsi_box ............................ Passed 1.18 sec
Start 108: freesurf_sloshing_2d
108/403 Test #108: freesurf_sloshing_2d ............... Passed 3.60 sec
Start 109: ExtrudedMeshDG
109/403 Test #109: ExtrudedMeshDG ..................... Passed 2.24 sec
Start 110: marangoni
110/403 Test #110: marangoni .......................... Passed 0.16 sec
Start 111: PhaseChange3
111/403 Test #111: PhaseChange3 ....................... Passed 0.51 sec
Start 112: ContactPatch2Delim
112/403 Test #112: ContactPatch2Delim ................. Passed 6.07 sec
Start 113: RaviartThomas2D
113/403 Test #113: RaviartThomas2D .................... Passed 0.17 sec
Start 114: ContactFrictionHeating
114/403 Test #114: ContactFrictionHeating ............. Passed 1.18 sec
Start 115: RotatingBCPoisson3DSymmSkev
115/403 Test #115: RotatingBCPoisson3DSymmSkev ........ Passed 3.27 sec
Start 116: ComponentResistance
116/403 Test #116: ComponentResistance ................ Passed 0.08 sec
Start 117: AdvReactDG
117/403 Test #117: AdvReactDG ......................... Passed 0.24 sec
Start 118: VectorHelmholtzWaveguide
118/403 Test #118: VectorHelmholtzWaveguide ........... Passed 3.38 sec
Start 119: InternalPartitioning5
119/403 Test #119: InternalPartitioning5 .............. Passed 0.50 sec
Start 120: rotflow
120/403 Test #120: rotflow ............................ Passed 0.44 sec
Start 121: CoilSolver4
121/403 Test #121: CoilSolver4 ........................ Passed 0.22 sec
Start 122: H1Basis
122/403 Test #122: H1Basis ............................ Passed 0.29 sec
Start 123: SaveLine
123/403 Test #123: SaveLine ........................... Passed 1.30 sec
Start 124: mgdyn_lamstack_lowfreq_transient
124/403 Test #124: mgdyn_lamstack_lowfreq_transient ... Passed 8.49 sec
Start 125: LubricationTunedForce
125/403 Test #125: LubricationTunedForce .............. Passed 0.54 sec
Start 126: shell2
126/403 Test #126: shell2 ............................. Passed 0.28 sec
Start 127: InductionHeating3
127/403 Test #127: InductionHeating3 .................. Passed 0.34 sec
Start 128: tresca
128/403 Test #128: tresca ............................. Passed 0.14 sec
Start 129: CapacitanceMatrix
129/403 Test #129: CapacitanceMatrix .................. Passed 0.16 sec
Start 130: ParStokes_NormalTangentialBC
130/403 Test #130: ParStokes_NormalTangentialBC ....... Passed 1.00 sec
Start 131: CoupledPoisson7
131/403 Test #131: CoupledPoisson7 .................... Passed 0.17 sec
Start 132: mgdyn_anisotropic_cond
132/403 Test #132: mgdyn_anisotropic_cond ............. Passed 3.99 sec
Start 133: periodic_offset
133/403 Test #133: periodic_offset .................... Passed 0.11 sec
Start 134: CoilSolver3
134/403 Test #134: CoilSolver3 ........................ Passed 0.30 sec
Start 135: HelmholtzStructure
135/403 Test #135: HelmholtzStructure ................. Passed 0.45 sec
Start 136: ContactPatch3DNames
136/403 Test #136: ContactPatch3DNames ................ Passed 1.62 sec
Start 137: CoupledPoisson5
137/403 Test #137: CoupledPoisson5 .................... Passed 0.23 sec
Start 138: PoissonThreaded
138/403 Test #138: PoissonThreaded .................... Passed 1.73 sec
Start 139: RotatingBCPoisson3DSymmSkew
139/403 Test #139: RotatingBCPoisson3DSymmSkew ........ Passed 3.26 sec
Start 140: 1sttime
140/403 Test #140: 1sttime ............................ Passed 0.33 sec
Start 141: CurvedBndryPFEM2
141/403 Test #141: CurvedBndryPFEM2 ................... Passed 0.06 sec
Start 142: mhd
142/403 Test #142: mhd ................................ Passed 1.51 sec
Start 143: PhaseChangeB
143/403 Test #143: PhaseChangeB ....................... Passed 2.27 sec
Start 144: StressConstraintModes3
144/403 Test #144: StressConstraintModes3 ............. Passed 10.36 sec
Start 145: MortarPoisson2Dpriority
145/403 Test #145: MortarPoisson2Dpriority ............ Passed 0.16 sec
Start 146: MortarPoisson2Dsum
146/403 Test #146: MortarPoisson2Dsum ................. Passed 0.09 sec
Start 147: heateq
147/403 Test #147: heateq ............................. Passed 0.33 sec
Start 148: ExtrudedMesh2
148/403 Test #148: ExtrudedMesh2 ...................... Passed 0.15 sec
Start 149: structmap_p2
149/403 Test #149: structmap_p2 ....................... Passed 0.14 sec
Start 150: DisContBoundaryMortarContElim
150/403 Test #150: DisContBoundaryMortarContElim ...... Passed 0.11 sec
Start 151: mgdyn_lamstack_lowfreq_harmonic
151/403 Test #151: mgdyn_lamstack_lowfreq_harmonic .... Passed 10.71 sec
Start 152: ParticleAdvectorZalesak
152/403 Test #152: ParticleAdvectorZalesak ............ Passed 3.23 sec
Start 153: CoupledPoisson9
153/403 Test #153: CoupledPoisson9 .................... Passed 0.12 sec
Start 154: MortarMixedDimensions
154/403 Test #154: MortarMixedDimensions .............. Passed 0.13 sec
Start 155: DNS_WaveSimulation
155/403 Test #155: DNS_WaveSimulation ................. Passed 9.35 sec
Start 156: CoordinateTrans2
156/403 Test #156: CoordinateTrans2 ................... Passed 0.78 sec
Start 157: ParticleAdvectorPathIntegral
157/403 Test #157: ParticleAdvectorPathIntegral ....... Passed 3.26 sec
Start 158: HelmholtzBEM
158/403 Test #158: HelmholtzBEM ....................... Passed 0.61 sec
Start 159: periodic_offset2
159/403 Test #159: periodic_offset2 ................... Passed 0.48 sec
Start 160: mgdyn_steady
160/403 Test #160: mgdyn_steady ....................... Passed 5.16 sec
Start 161: adv_diff4
161/403 Test #161: adv_diff4 .......................... Passed 2.01 sec
Start 162: ThermalPipe2D
162/403 Test #162: ThermalPipe2D ...................... Passed 0.11 sec
Start 163: NaturalConvectionRestart
163/403 Test #163: NaturalConvectionRestart ........... Passed 5.12 sec
Start 164: InternalPartitioning3
164/403 Test #164: InternalPartitioning3 .............. Passed 1.16 sec
Start 165: DisContBoundaryMortarJumpC
165/403 Test #165: DisContBoundaryMortarJumpC ......... Passed 0.13 sec
Start 166: LimitDisplacement
166/403 Test #166: LimitDisplacement .................. Passed 2.06 sec
Start 167: CoupledPoisson2c
167/403 Test #167: CoupledPoisson2c ................... Passed 0.95 sec
Start 168: ContactBlunt2Dstick
168/403 Test #168: ContactBlunt2Dstick ................ Passed 8.18 sec
Start 169: mgdyn_steady_wire
169/403 Test #169: mgdyn_steady_wire .................. Passed 2.30 sec
Start 170: Step_stokes_block
170/403 Test #170: Step_stokes_block .................. Passed 0.17 sec
Start 171: StressConstraintModes2
171/403 Test #171: StressConstraintModes2 ............. Passed 0.10 sec
Start 172: SaveDependence
172/403 Test #172: SaveDependence ..................... Passed 0.07 sec
Start 173: savescalars
173/403 Test #173: savescalars ........................ Passed 0.23 sec
Start 174: structmap5
174/403 Test #174: structmap5 ......................... Passed 0.28 sec
Start 175: structmap
175/403 Test #175: structmap .......................... Passed 0.13 sec
Start 176: ParticleHeating
176/403 Test #176: ParticleHeating .................... Passed 5.53 sec
Start 177: periodic_explicit
177/403 Test #177: periodic_explicit .................. Passed 0.85 sec
Start 178: ContactPatch3D
178/403 Test #178: ContactPatch3D ..................... Passed 1.60 sec
Start 179: RotatingBCMagnetoDynamics2
179/403 Test #179: RotatingBCMagnetoDynamics2 ......... Passed 10.89 sec
Start 180: pointload2
180/403 Test #180: pointload2 ......................... Passed 1.15 sec
Start 181: savescalars_many
181/403 Test #181: savescalars_many ................... Passed 0.27 sec
Start 182: mgdyn2D_em
182/403 Test #182: mgdyn2D_em ......................... Passed 1.96 sec
Start 183: bodydir
183/403 Test #183: bodydir ............................ Passed 0.08 sec
Start 184: CoilSolver1
184/403 Test #184: CoilSolver1 ........................ Passed 0.26 sec
Start 185: DisContBoundaryNodalJumpB
185/403 Test #185: DisContBoundaryNodalJumpB .......... Passed 0.08 sec
Start 186: MortarPoisson2D
186/403 Test #186: MortarPoisson2D .................... Passed 0.07 sec
Start 187: RotatingBCMagnetoDynamics
187/403 Test #187: RotatingBCMagnetoDynamics .......... Passed 4.60 sec
Start 188: freesurf_ltd
188/403 Test #188: freesurf_ltd ....................... Passed 2.46 sec
Start 189: mgdyn_harmonic_loss
189/403 Test #189: mgdyn_harmonic_loss ................ Passed 6.20 sec
Start 190: mhd2
190/403 Test #190: mhd2 ............................... Passed 1.62 sec
Start 191: ContactPatch3DNamesAndAutonum2
191/403 Test #191: ContactPatch3DNamesAndAutonum2 ..... Passed 1.62 sec
Start 192: mgdyn_steady_wire2
192/403 Test #192: mgdyn_steady_wire2 ................. Passed 5.81 sec
Start 193: NaturalConvection2
193/403 Test #193: NaturalConvection2 ................. Passed 2.79 sec
Start 194: DisContBoundaryMortarJump
194/403 Test #194: DisContBoundaryMortarJump .......... Passed 0.08 sec
Start 195: passive
195/403 Test #195: passive ............................ Passed 0.46 sec
Start 196: mgdyn_torus
196/403 Test #196: mgdyn_torus ........................ Passed 3.15 sec
Start 197: ElastElstatBeam
197/403 Test #197: ElastElstatBeam .................... Passed 0.30 sec
Start 198: heateq_infty
198/403 Test #198: heateq_infty ....................... Passed 1.66 sec
Start 199: ExtrudedMesh4
199/403 Test #199: ExtrudedMesh4 ...................... Passed 0.26 sec
Start 200: vortex3d
200/403 Test #200: vortex3d ........................... Passed 0.83 sec
Start 201: DirichletNeumann
201/403 Test #201: DirichletNeumann ................... Passed 0.19 sec
Start 202: SecondOrderEdgeElement2D_BCs
202/403 Test #202: SecondOrderEdgeElement2D_BCs ....... Passed 0.09 sec
Start 203: periodic_rot
203/403 Test #203: periodic_rot ....................... Passed 0.09 sec
Start 204: ElmerGridCloneZ
204/403 Test #204: ElmerGridCloneZ .................... Passed 0.12 sec
Start 205: ContactPatch2Dtie
205/403 Test #205: ContactPatch2Dtie .................. Passed 0.10 sec
Start 206: ParStokes_NormalTangentialBC3D
206/403 Test #206: ParStokes_NormalTangentialBC3D ..... Passed 31.80 sec
Start 207: adaptivity5
207/403 Test #207: adaptivity5 ........................ Passed 0.23 sec
Start 208: ShallowWaterNS
208/403 Test #208: ShallowWaterNS ..................... Passed 1.63 sec
Start 209: CavityLid
209/403 Test #209: CavityLid .......................... Passed 0.41 sec
Start 210: DisContBoundaryNodalProj
210/403 Test #210: DisContBoundaryNodalProj ........... Passed 0.15 sec
Start 211: mgdyn_bh
211/403 Test #211: mgdyn_bh ........................... Passed 13.74 sec
Start 212: StructuredHeightDepth
212/403 Test #212: StructuredHeightDepth .............. Passed 1.27 sec
Start 213: HelmholtzStructure3
213/403 Test #213: HelmholtzStructure3 ................ Passed 0.94 sec
Start 214: ModelPDE
214/403 Test #214: ModelPDE ........................... Passed 0.12 sec
Start 215: plates
215/403 Test #215: plates ............................. Passed 0.08 sec
Start 216: NormalTangentialDisplacement
216/403 Test #216: NormalTangentialDisplacement ....... Passed 0.26 sec
Start 217: savescalars_flux
217/403 Test #217: savescalars_flux ................... Passed 0.12 sec
Start 218: HarmonicNS
218/403 Test #218: HarmonicNS ......................... Passed 1.00 sec
Start 219: channel_v2f
219/403 Test #219: channel_v2f ........................ Passed 2.93 sec
Start 220: PorousPipe
220/403 Test #220: PorousPipe ......................... Passed 0.52 sec
Start 221: NormalizeBC
221/403 Test #221: NormalizeBC ........................ Passed 0.13 sec
Start 222: levelset2
222/403 Test #222: levelset2 .......................... Passed 1.21 sec
Start 223: periodic2
223/403 Test #223: periodic2 .......................... Passed 0.12 sec
Start 224: gmultg
224/403 Test #224: gmultg ............................. Passed 0.24 sec
Start 225: AdvDiffHandles3
225/403 Test #225: AdvDiffHandles3 .................... Passed 0.17 sec
Start 226: Step_sa
226/403 Test #226: Step_sa ............................ Passed 4.43 sec
Start 227: OdeSolver1stOrder
227/403 Test #227: OdeSolver1stOrder .................. Passed 0.12 sec
Start 228: CompressIdealGas
228/403 Test #228: CompressIdealGas ................... Passed 3.33 sec
Start 229: InternalPartitioning2
229/403 Test #229: InternalPartitioning2 .............. Passed 1.37 sec
Start 230: RotatingBCPoisson3D
230/403 Test #230: RotatingBCPoisson3D ................ Passed 6.74 sec
Start 231: radiation2d
231/403 Test #231: radiation2d ........................ Passed 3.95 sec
Start 232: DisContBoundary3D
232/403 Test #232: DisContBoundary3D .................. Passed 0.30 sec
Start 233: BoundaryFluxes2
233/403 Test #233: BoundaryFluxes2 .................... Passed 0.13 sec
Start 234: HeatGap
234/403 Test #234: HeatGap ............................ Passed 0.09 sec
Start 235: mgdyn_lamstack_widefreq_harmonic
235/403 Test #235: mgdyn_lamstack_widefreq_harmonic ... Passed 4.30 sec
Start 236: Step_stokes
236/403 Test #236: Step_stokes ........................ Passed 0.16 sec
Start 237: ElmerGridExtrudeMaterial2
237/403 Test #237: ElmerGridExtrudeMaterial2 .......... Passed 0.34 sec
Start 238: mgdyn_torus_harmonic
238/403 Test #238: mgdyn_torus_harmonic ............... Passed 37.33 sec
Start 239: CoupledPoisson2b
239/403 Test #239: CoupledPoisson2b ................... Passed 0.85 sec
Start 240: structmap3
240/403 Test #240: structmap3 ......................... Passed 6.30 sec
Start 241: HeatControl2
241/403 Test #241: HeatControl2 ....................... Passed 0.18 sec
Start 242: WinkelPoissonMetisKwayDual
242/403 Test #242: WinkelPoissonMetisKwayDual ......... Passed 18.42 sec
Start 243: ThermalCompress
243/403 Test #243: ThermalCompress .................... Passed 0.55 sec
Start 244: WeightComputation
244/403 Test #244: WeightComputation .................. Passed 0.09 sec
Start 245: RotatingBCMagnetoDynamicsGeneric
245/403 Test #245: RotatingBCMagnetoDynamicsGeneric ... Passed 25.78 sec
Start 246: ContactPatch2Dnt
246/403 Test #246: ContactPatch2Dnt ................... Passed 0.14 sec
Start 247: mgdyn_3phase
247/403 Test #247: mgdyn_3phase ....................... Passed 2.50 sec
Start 248: RigidMeshMapper2
248/403 Test #248: RigidMeshMapper2 ................... Passed 0.30 sec
Start 249: shell
249/403 Test #249: shell .............................. Passed 0.16 sec
Start 250: pointload
250/403 Test #250: pointload .......................... Passed 0.09 sec
Start 251: heateq_steady_start
251/403 Test #251: heateq_steady_start ................ Passed 0.20 sec
Start 252: heateq_spline_table
252/403 Test #252: heateq_spline_table ................ Passed 0.60 sec
Start 253: DisContBoundaryDoubleNames
253/403 Test #253: DisContBoundaryDoubleNames ......... Passed 0.17 sec
Start 254: InternalPartitioning4
254/403 Test #254: InternalPartitioning4 .............. Passed 0.44 sec
Start 255: CurvedBndryPFEM
255/403 Test #255: CurvedBndryPFEM .................... Passed 0.07 sec
Start 256: amultg
256/403 Test #256: amultg ............................. Passed 0.73 sec
Start 257: radiation
257/403 Test #257: radiation .......................... Passed 0.38 sec
Start 258: SensTemperature
258/403 Test #258: SensTemperature .................... Passed 0.50 sec
Start 259: L2norm
259/403 Test #259: L2norm ............................. Passed 1.25 sec
Start 260: heateq_newmark
260/403 Test #260: heateq_newmark ..................... Passed 0.21 sec
Start 261: beam-springs
261/403 Test #261: beam-springs ....................... Passed 0.47 sec
Start 262: Q1Q0
262/403 Test #262: Q1Q0 ............................... Passed 0.16 sec
Start 263: mgdyn_airgap
263/403 Test #263: mgdyn_airgap ....................... Passed 0.24 sec
Start 264: HelmholtzEdge
264/403 Test #264: HelmholtzEdge ...................... Passed 0.23 sec
Start 265: HelmholtzPlaneWaves
265/403 Test #265: HelmholtzPlaneWaves ................ Passed 0.31 sec
Start 266: periodic3
266/403 Test #266: periodic3 .......................... Passed 0.11 sec
Start 267: InternalPartitioning6
267/403 Test #267: InternalPartitioning6 .............. Passed 0.31 sec
Start 268: ExtrusionStructured2D
268/403 Test #268: ExtrusionStructured2D .............. Passed 1.38 sec
Start 269: levelset3b
269/403 Test #269: levelset3b ......................... Passed 3.40 sec
Start 270: fluxsolver2
270/403 Test #270: fluxsolver2 ........................ Passed 0.09 sec
Start 271: InternalPartitioning
271/403 Test #271: InternalPartitioning ............... Passed 1.27 sec
Start 272: ElasticLubrication
272/403 Test #272: ElasticLubrication ................. Passed 1.62 sec
Start 273: linearsolvers_cmplx
273/403 Test #273: linearsolvers_cmplx ................ Passed 0.86 sec
Start 274: elstat_infty
274/403 Test #274: elstat_infty ....................... Passed 2.18 sec
Start 275: el_adaptivity
275/403 Test #275: el_adaptivity ...................... Passed 0.15 sec
Start 276: MeshRefineGrading
276/403 Test #276: MeshRefineGrading .................. Passed 1.61 sec
Start 277: StressEigen3D
277/403 Test #277: StressEigen3D ...................... Passed 10.17 sec
Start 278: BlockLinElast3
278/403 Test #278: BlockLinElast3 ..................... Passed 1.58 sec
Start 279: ElmerGridExtrudeOffset
279/403 Test #279: ElmerGridExtrudeOffset ............. Passed 0.25 sec
Start 280: ModelPDEsplitted
280/403 Test #280: ModelPDEsplitted ................... Passed 0.11 sec
Start 281: DisContBoundaryDouble
281/403 Test #281: DisContBoundaryDouble .............. Passed 0.25 sec
Start 282: 1dtests
282/403 Test #282: 1dtests ............................ Passed 0.07 sec
Start 283: HeatPlateSym
283/403 Test #283: HeatPlateSym ....................... Passed 2.81 sec
Start 284: freesurf
284/403 Test #284: freesurf ........................... Passed 0.71 sec
Start 285: elasticity
285/403 Test #285: elasticity ......................... Passed 0.26 sec
Start 286: PoissonDG
286/403 Test #286: PoissonDG .......................... Passed 0.18 sec
Start 287: DataToField
287/403 Test #287: DataToField ........................ Passed 0.37 sec
Start 288: ContactPatch3DNamesAndAutonum
288/403 Test #288: ContactPatch3DNamesAndAutonum ...... Passed 1.54 sec
Start 289: SecondOrderEdgeElement3D
289/403 Test #289: SecondOrderEdgeElement3D ........... Passed 0.24 sec
Start 290: ContactPatch3Delim
290/403 Test #290: ContactPatch3Delim ................. Passed 6.64 sec
Start 291: PhaseChange2
291/403 Test #291: PhaseChange2 ....................... Passed 0.53 sec
Start 292: CoupledPoisson8
292/403 Test #292: CoupledPoisson8 .................... Passed 0.14 sec
Start 293: HelmholtzPlaneWavesAxis
293/403 Test #293: HelmholtzPlaneWavesAxis ............ Passed 0.36 sec
Start 294: mgdyn_transient_loss
294/403 Test #294: mgdyn_transient_loss ............... Passed 14.78 sec
Start 295: DataToField2
295/403 Test #295: DataToField2 ....................... Passed 0.15 sec
Start 296: mgdyn_anisotropic_rel
296/403 Test #296: mgdyn_anisotropic_rel .............. Passed 1.73 sec
Start 297: periodic_homogenize
297/403 Test #297: periodic_homogenize ................ Passed 0.40 sec
Start 298: mgdyn_airgap_force
298/403 Test #298: mgdyn_airgap_force ................. Passed 16.14 sec
Start 299: FlowResNoslip
299/403 Test #299: FlowResNoslip ...................... Passed 5.36 sec
Start 300: CavityLid2
300/403 Test #300: CavityLid2 ......................... Passed 2.30 sec
Start 301: buckling
301/403 Test #301: buckling ........................... Passed 0.18 sec
Start 302: freesurf_axi
302/403 Test #302: freesurf_axi ....................... Passed 0.76 sec
Start 303: HeatControl
303/403 Test #303: HeatControl ........................ Passed 0.14 sec
Start 304: mgdyn_harmonic
304/403 Test #304: mgdyn_harmonic ..................... Passed 8.45 sec
Start 305: PoissonThreaded3
305/403 Test #305: PoissonThreaded3 ................... Passed 1.87 sec
Start 306: PoissonThreaded2
306/403 Test #306: PoissonThreaded2 ................... Passed 1.80 sec
Start 307: CoilSolver6
307/403 Test #307: CoilSolver6 ........................ Passed 0.33 sec
Start 308: savescalars_boundary
308/403 Test #308: savescalars_boundary ............... Passed 0.15 sec
Start 309: ExtrudedMesh
309/403 Test #309: ExtrudedMesh ....................... Passed 0.10 sec
Start 310: mgdyn2D_pm
310/403 Test #310: mgdyn2D_pm ......................... Passed 0.18 sec
Start 311: CoordinateTrans
311/403 Test #311: CoordinateTrans .................... Passed 0.46 sec
Start 312: LimitDisplacement2
312/403 Test #312: LimitDisplacement2 ................. Passed 3.62 sec
Start 313: TimeFunc
313/403 Test #313: TimeFunc ........................... Passed 1.45 sec
Start 314: DisContBoundaryDoubleMortar
314/403 Test #314: DisContBoundaryDoubleMortar ........ Passed 0.24 sec
Start 315: CoupledPoisson6
315/403 Test #315: CoupledPoisson6 .................... Passed 0.13 sec
Start 316: WaveEqu
316/403 Test #316: WaveEqu ............................ Passed 0.12 sec
Start 317: geomstiff
317/403 Test #317: geomstiff .......................... Passed 0.13 sec
Start 318: structmap2
318/403 Test #318: structmap2 ......................... Passed 0.72 sec
Start 319: BlockPoisson2
319/403 Test #319: BlockPoisson2 ...................... Passed 0.20 sec
Start 320: TravellingHeater2
320/403 Test #320: TravellingHeater2 .................. Passed 4.87 sec
Start 321: RotatingBeamFlow
321/403 Test #321: RotatingBeamFlow ................... Passed 6.99 sec
Start 322: savescalars_mask
322/403 Test #322: savescalars_mask ................... Passed 0.17 sec
Start 323: platesEigen
323/403 Test #323: platesEigen ........................ Passed 0.29 sec
Start 324: ContactPatch3DNamesAndAutonum3
324/403 Test #324: ContactPatch3DNamesAndAutonum3 ..... Passed 1.58 sec
Start 325: periodic1
325/403 Test #325: periodic1 .......................... Passed 0.11 sec
Start 326: Step_v2f
326/403 Test #326: Step_v2f ........................... Passed 10.67 sec
Start 327: mgdyn_airgap_harmonic
327/403 Test #327: mgdyn_airgap_harmonic .............. Passed 0.24 sec
Start 328: StokesProj
328/403 Test #328: StokesProj ......................... Passed 0.38 sec
Start 329: DisContBoundary
329/403 Test #329: DisContBoundary .................... Passed 0.09 sec
Start 330: TankAst
330/403 Test #330: TankAst ............................ Passed 0.10 sec
Start 331: mgdyn_steady_piolaversion
331/403 Test #331: mgdyn_steady_piolaversion .......... Passed 0.42 sec
Start 332: StokesPFEM
332/403 Test #332: StokesPFEM ......................... Passed 0.17 sec
Start 333: adaptivity3
333/403 Test #333: adaptivity3 ........................ Passed 0.44 sec
Start 334: RichardsDyke2
334/403 Test #334: RichardsDyke2 ...................... Passed 4.19 sec
Start 335: CoupledPoisson4
335/403 Test #335: CoupledPoisson4 .................... Passed 0.12 sec
Start 336: CoupledPoisson2
336/403 Test #336: CoupledPoisson2 .................... Passed 0.76 sec
Start 337: RaviartThomas3D
337/403 Test #337: RaviartThomas3D .................... Passed 0.52 sec
Start 338: ElmerGridExtrudeHelicity
338/403 Test #338: ElmerGridExtrudeHelicity ........... Passed 0.49 sec
Start 339: DisContBoundaryNodalJump
339/403 Test #339: DisContBoundaryNodalJump ........... Passed 0.09 sec
Start 340: fluxsolver
340/403 Test #340: fluxsolver ......................... Passed 0.08 sec
Start 341: PoissonPFEM
341/403 Test #341: PoissonPFEM ........................ Passed 0.07 sec
Start 342: bentonite
342/403 Test #342: bentonite .......................... Passed 0.08 sec
Start 343: multimesh
343/403 Test #343: multimesh .......................... Passed 0.24 sec
Start 344: DivergenceAnalytic2D
344/403 Test #344: DivergenceAnalytic2D ............... Passed 0.40 sec
Start 345: IsolineGmsh
345/403 Test #345: IsolineGmsh ........................ Passed 0.10 sec
Start 346: BDM2D
346/403 Test #346: BDM2D .............................. Passed 0.16 sec
Start 347: RotatingBCPoisson3DGeneric
347/403 Test #347: RotatingBCPoisson3DGeneric ......... Passed 6.28 sec
Start 348: adaptivity2
348/403 Test #348: adaptivity2 ........................ Passed 0.28 sec
Start 349: SaveCircle
349/403 Test #349: SaveCircle ......................... Passed 1.27 sec
Start 350: HelmholtzStructure2
350/403 Test #350: HelmholtzStructure2 ................ Passed 0.31 sec
Start 351: piezo
351/403 Test #351: piezo .............................. Passed 0.19 sec
Start 352: current_heat_control
352/403 Test #352: current_heat_control ............... Passed 0.34 sec
Start 353: reynolds1
353/403 Test #353: reynolds1 .......................... Passed 1.47 sec
Start 354: CoupledPoisson1b
354/403 Test #354: CoupledPoisson1b ................... Passed 0.13 sec
Start 355: ConstantBCDisplacement
355/403 Test #355: ConstantBCDisplacement ............. Passed 1.39 sec
Start 356: structmap4
356/403 Test #356: structmap4 ......................... Passed 0.48 sec
Start 357: NormalizeBF
357/403 Test #357: NormalizeBF ........................ Passed 0.11 sec
Start 358: MgDynDiscontBCs
358/403 Test #358: MgDynDiscontBCs .................... Passed 1.23 sec
Start 359: CoupledPoisson3
359/403 Test #359: CoupledPoisson3 .................... Passed 0.14 sec
Start 360: ParticleAdvector3
360/403 Test #360: ParticleAdvector3 .................. Passed 2.26 sec
Start 361: 2ndtime
361/403 Test #361: 2ndtime ............................ Passed 0.39 sec
Start 362: stress
362/403 Test #362: stress ............................. Passed 0.20 sec
Start 363: LimitTemperature2
363/403 Test #363: LimitTemperature2 .................. Passed 7.08 sec
Start 364: SinPlane
364/403 Test #364: SinPlane ........................... Passed 3.24 sec
Start 365: TravellingHeater
365/403 Test #365: TravellingHeater ................... Passed 3.75 sec
Start 366: mgdyn_angular_steady
366/403 Test #366: mgdyn_angular_steady ............... Passed 3.66 sec
Start 367: BoundaryFluxes
367/403 Test #367: BoundaryFluxes ..................... Passed 0.13 sec
Start 368: BlockLinElast2b
368/403 Test #368: BlockLinElast2b .................... Passed 0.15 sec
Start 369: NormalizeMaterial
369/403 Test #369: NormalizeMaterial .................. Passed 0.08 sec
Start 370: mgdyn_steady_2ndorder
370/403 Test #370: mgdyn_steady_2ndorder .............. Passed 0.66 sec
Start 371: AngleMetisLayer
371/403 Test #371: AngleMetisLayer .................... Passed 0.35 sec
Start 372: MeshColour
372/403 Test #372: MeshColour ......................... Passed 0.39 sec
Start 373: NormalTangentialBC
373/403 Test #373: NormalTangentialBC ................. Passed 0.98 sec
Start 374: mgdyn_steady_periodic
374/403 Test #374: mgdyn_steady_periodic .............. Passed 6.65 sec
Start 375: OtherMeshResults
375/403 Test #375: OtherMeshResults ................... Passed 0.13 sec
Start 376: reynolds2
376/403 Test #376: reynolds2 .......................... Passed 0.36 sec
Start 377: adv_diff2
377/403 Test #377: adv_diff2 .......................... Passed 0.49 sec
Start 378: rot_aniso
378/403 Test #378: rot_aniso .......................... Passed 1.65 sec
Start 379: periodic_nonconforming
379/403 Test #379: periodic_nonconforming ............. Passed 0.16 sec
Start 380: HelmholtzFEM
380/403 Test #380: HelmholtzFEM ....................... Passed 0.15 sec
Start 381: mgdyn_transient
381/403 Test #381: mgdyn_transient .................... Passed 13.06 sec
Start 382: elstat
382/403 Test #382: elstat ............................. Passed 2.60 sec
Start 383: ElastElstat1DBeam
383/403 Test #383: ElastElstat1DBeam .................. Passed 0.18 sec
Start 384: NonnewtonianChannelFlow
384/403 Test #384: NonnewtonianChannelFlow ............ Passed 0.42 sec
Start 385: Step_ke
385/403 Test #385: Step_ke ............................ Passed 1.12 sec
Start 386: ContactBlunt2Dslide
386/403 Test #386: ContactBlunt2Dslide ................ Passed 13.08 sec
Start 387: ThermalActuator
387/403 Test #387: ThermalActuator .................... Passed 31.06 sec
Start 388: RigidMeshMapper1
388/403 Test #388: RigidMeshMapper1 ................... Passed 0.23 sec
Start 389: freesurf_maxd
389/403 Test #389: freesurf_maxd ...................... Passed 0.79 sec
Start 390: CoilSolver5
390/403 Test #390: CoilSolver5 ........................ Passed 0.33 sec
Start 391: Step_ns
391/403 Test #391: Step_ns ............................ Passed 0.27 sec
Start 392: ThermalBiMetal2
392/403 Test #392: ThermalBiMetal2 .................... Passed 0.17 sec
Start 393: mgdyn_harmonic_wire
393/403 Test #393: mgdyn_harmonic_wire ................ Passed 4.76 sec
Start 394: RotatingFlow
394/403 Test #394: RotatingFlow ....................... Passed 0.57 sec
Start 395: ElasticBeamRestart
395/403 Test #395: ElasticBeamRestart ................. Passed 7.03 sec
Start 396: Step_sst-kw-wf
396/403 Test #396: Step_sst-kw-wf ..................... Passed 9.72 sec
Start 397: ExtrudedMesh5
397/403 Test #397: ExtrudedMesh5 ...................... Passed 2.03 sec
Start 398: Electrokinetics
398/403 Test #398: Electrokinetics .................... Passed 8.29 sec
Start 399: HelmholtzFace
399/403 Test #399: HelmholtzFace ...................... Passed 0.23 sec
Start 400: adv_diff3
400/403 Test #400: adv_diff3 .......................... Passed 1.42 sec
Start 401: CapacitanceMatrix2
401/403 Test #401: CapacitanceMatrix2 ................. Passed 0.19 sec
Start 402: ElmerGridExtrudeMaterial
402/403 Test #402: ElmerGridExtrudeMaterial ........... Passed 0.25 sec
Start 403: BlockLinElast1
403/403 Test #403: BlockLinElast1 ..................... Passed 0.31 sec

100% tests passed, 0 tests failed out of 403

Label Time Summary:
aster = 7.45 sec (5 tests)
benchmark = 79.48 sec (14 tests)
contact = 54.90 sec (17 tests)
eliminate = 0.11 sec (1 test)
elmerice = 157.74 sec (1 test)
heateq = 24.62 sec (12 tests)
particle = 21.49 sec (8 tests)
quick = 53.45 sec (206 tests)
serial = 933.29 sec (403 tests)
slow = 157.74 sec (1 test)
threaded = 5.40 sec (3 tests)
whitney = 214.48 sec (27 tests)

Total Test time (real) = 933.52 sec
elmer@Precision-Tower-5810:~/elmer/build$
Estiivan
 
Posts: 25
Joined: 14 Nov 2016, 14:06

Re: ./ResultOutputSolve.so: cannot open shared object file: No s

Postby annier » 29 Nov 2016, 11:19

Hi,
All of the tests have passed and thus your elmer installation is successful.

Yours Sincerely,
Anil Kunwar
annier
 
Posts: 1034
Joined: 27 Aug 2013, 13:51

Re: ./ResultOutputSolve.so: cannot open shared object file: No s

Postby Estiivan » 29 Nov 2016, 15:05

Hi Annier,

Hmm. I still have problem with ElmerGUI although (/home/elmer/elmer/install/share/elmersolver/lib/ResultOutputSolve: cannot open shared object file: No such file or directory
libmpi_stubs.so: cannot open shared object file: No such file or directory). I just wondered as I saw your answer to my other installation problem that in both installations I do not have a folder ~/elmer/install/share/ElmerGUI. Under ~/elmer/install/share there is only a folder elmersolver. Might this cause the problems? I can find ElmerGUI folder in ~/elmer/elmerfem/ElmerGUI however.

My $PATH looks as follows:

elmer@Precision-Tower-5810:~/elmer/install/share/elmersolver$ $PATH
bash: /home/elmer/bin:/home/elmer/.local/bin:/opt/OpenPrinting-Gutenprint/sbin:/opt/OpenPrinting-Gutenprint/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin:/home/elmer/elmer/install/bin: No such file or directory
elmer@Precision-Tower-5
Estiivan
 
Posts: 25
Joined: 14 Nov 2016, 14:06

Re: ./ResultOutputSolve.so: cannot open shared object file: No s

Postby annier » 29 Nov 2016, 17:19

Summary:
1. Elmer NonGui (basically elmersolver) installation is successful in your Ubuntu OS. I am a user of Elmer NonGUI.
2. ElmerGUI is not installed in your system owing to the absence of pre-requisite libraries for ElmerGUI. I have installed ElmerGUI as a part of regular installation process.


Yours Sincerely,
Anil Kunwar
annier
 
Posts: 1034
Joined: 27 Aug 2013, 13:51


Return to Installation & compilation

Who is online

Users browsing this forum: No registered users and 2 guests

cron