Launchpad Installation failure on Ubuntu 14.10

Discussion about building and installing Elmer
Post Reply
kishpishar
Posts: 54
Joined: 17 Jun 2015, 10:04
Antispam: Yes

Launchpad Installation failure on Ubuntu 14.10

Post by kishpishar »

I tried to install Elmer using the Launchpad option by adding the repository and using apt-get install as described here: https://www.csc.fi/web/elmer/binaries

The installation does not proceed and gives me the error message:

Reading package lists... Done
Building dependency tree
Reading state information... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:

The following packages have unmet dependencies:
elmerfem-csc : Depends: libmumps-4.10.0 but it is not going to be installed
Depends: libhypre-2.8.0b but it is not going to be installed
Depends: libvtk5.8 but it is not going to be installed
Depends: libvtk5.8-qt4 but it is not going to be installed

I have very little knowledge of compiling from sources in Ubuntu. Could anyone please help me to install it correctly? Thanks for your help,

Jay
annier
Posts: 1168
Joined: 27 Aug 2013, 13:51
Antispam: Yes

Re: Launchpad Installation failure on Ubuntu 14.10

Post by annier »

Hi Jay,
Your computer needs the installation of hypre libraries and libvtk of the version mentioned in the above texts before you proceed the installation of Elmer from launchpad.

Yours Sincerely,
Anil Kunwar
Anil Kunwar
Faculty of Mechanical Engineering, Silesian University of Technology, Gliwice
Post Reply