Elmer cannot run under a different user than administrator

Discussion about building and installing Elmer
Post Reply
studioa
Posts: 23
Joined: 23 Jul 2011, 23:39
Antispam: Yes

Elmer cannot run under a different user than administrator

Post by studioa »

Hello - I ran into this strange problem using Elmer 6.2 under Windows7 - I created another user on a machine (though with administrative rights) and when try to run a case, Elmer stops immediately ...
logging in back as administrator, everything runs fine ... I opened Elmer GUI "as administrator" still the same issue. Finally I have looked at the ElmerGUI Installation Tester and says that Elmer is not installed correctly:

Elmer seems to be installed incorrectly on this system
1) Make sure that ELMER_HOME has been set up properly
2) Set ELMERGUI_HOME to ELMER_HOME/bin
3) Set ELMER_POST_HOME to ELMER_HOME/share/elmerpost
4) Make sure that ELMER_HOME/bin is in PATH
5) Make sure that ELMER_HOME/lib is in PATH
6) Executables should be found from ELMER_HOME/bin

Thanks for help!
Post Reply