Changed variable names are not correctly imported into ElmerGUI when reopening a prior saved project. The sif file is still correct and correctly generated as long as the equation dialogue are not updated.
I have changed the "Variable" of a "Static Current Conduction" solver from "Potential" to "PotentialCurr" and saved everything (mesh, sif, project ... see .zip attachment).
But when opening the project again, the "Variabel" field is set back to "Potential". Although the variabel is set correctly in the .sif file when generating the file (see screenshot), as long as I do not open the equation dialogue (and update).
I have attached all necessary project files for testing. Can anyone reproduce this?
I use a fresh git-Elmer from 2015 Nov 06th on Ubuntu x64.
BR,
Wil
Incorrect import of solver variables into GUI
Incorrect import of solver variables into GUI
- Attachments
-
- tmp.zip
- Screen-shot showing the wrong variable name in the GUI ("Potential") even when the .sif files shows the prior changed one ("PotentialCurr").
- (224.6 KiB) Downloaded 362 times
Re: Incorrect import of solver variables into GUI
Hi,
this is a long-known bug (see viewtopic.php?f=4&t=2113, viewtopic.php?f=4&t=2690#p8214, viewtopic.php?f=4&t=3889). I am afraid that it will not be fixed in the foreseeable future...
Workaraound: Load a project only with a fresh ElmerGUI, don't reload it without restarting ElmerGUI.
HTH,
Matthias
this is a long-known bug (see viewtopic.php?f=4&t=2113, viewtopic.php?f=4&t=2690#p8214, viewtopic.php?f=4&t=3889). I am afraid that it will not be fixed in the foreseeable future...
Workaraound: Load a project only with a fresh ElmerGUI, don't reload it without restarting ElmerGUI.
HTH,
Matthias
Re: Incorrect import of solver variables into GUI
Hallo Matthias,
Thank you for the hint and pointing into the right direction! It is a problem of loading extra edf (xml) files as monacellif describes in his post here viewtopic.php?f=4&t=3889#p13678.
I have used a custom made edf file for the electrostatic force solver which seams to create the problem (see viewtopic.php?f=3&t=4100&start=0). I will work on this file to make it "standard-conform", hoping to resolve the problem.
BR,
Wil
Thank you for the hint and pointing into the right direction! It is a problem of loading extra edf (xml) files as monacellif describes in his post here viewtopic.php?f=4&t=3889#p13678.
I have used a custom made edf file for the electrostatic force solver which seams to create the problem (see viewtopic.php?f=3&t=4100&start=0). I will work on this file to make it "standard-conform", hoping to resolve the problem.
BR,
Wil
Re: Incorrect import of solver variables into GUI
Hi,
the problem might not be the edf-file as such. Could it be that you have saved a project without your custom edf file loaded, and then reloaded it when the custom edf file was there? In that case, the solver settings get screwed up, see viewtopic.php?f=4&t=847.
HTH,
Matthias
the problem might not be the edf-file as such. Could it be that you have saved a project without your custom edf file loaded, and then reloaded it when the custom edf file was there? In that case, the solver settings get screwed up, see viewtopic.php?f=4&t=847.
HTH,
Matthias