I"m using Elmer7.0-rev6064-2013-02-15 on Windows7-64bits.
I start ElmerGUI and do File -> Load Mesh -> OK (in a directory where I have no mesh, like default on c:\)
Then I do file -> Open (the attached geometry) -> the GUI crashes.
I have that also with a .msh file from gmesh and others.
It's a general instability of the GUI.
ElmerGUI crashing at CAD opening
ElmerGUI crashing at CAD opening
- Attachments
-
- cube.step.7z
- (3.79 KiB) Downloaded 356 times