I use Debian 6.0 and I updated my Elmer package to the the last debian(unstable) release (elmer (5.5.0.svn.5100.dfsg-1)).
Now I have a problem with the solver log.
Usual I use
and the output in the solver log is all fine.Max Output Level = 4.
But now I have to much output e.g.
When is reduce the Max Output Level I have always the same output from above.MAIN: -------------------------------------
MAIN: Time: 15/200 7.5000000000000000
MAIN: Estimated time left: 26 minutes.
MAIN: -------------------------------------
MAIN:
1 0.6212E-05
2 0.6844E-06
3 0.3401E-07
4 0.2689E-08
4 0.2689E-08
ComputeChange: NS (ITER=1) (NRM,RELC): ( 1710.8575 0.15875999E-03 ) :: heat equation
1 0.1301E-05
2 0.3742E-07
3 0.2047E-08
3 0.2047E-08
ComputeChange: NS (ITER=2) (NRM,RELC): ( 1710.8504 0.41972366E-05 ) :: heat equation
1 0.1518E-08
1 0.1518E-08
ComputeChange: NS (ITER=3) (NRM,RELC): ( 1710.8504 0.71245916E-08 ) :: heat equation
1 0.3530E-01
2 0.2481E-01
3 0.1635E-01
4 0.8481E-02
5 0.4806E-02
....
334 0.9502E-08
ComputeChange: NS (ITER=1) (NRM,RELC): ( 0.43941777E-07 2.0000000 ) :: stress analysis
So what can I do to reduce the output in the solver log?
Best regards,
René