Search found 9 matches
- 07 Oct 2018, 18:39
- Forum: ElmerGUI
- Topic: Problem after adding NURBS
- Replies: 0
- Views: 4923
Problem after adding NURBS
Dear all, I have a problem after Run ELMERGUI. FYI, I use GID software for structure drawing and mesh generation. I want to get the data on the vertical boundary (as shown in the Picture : Single_NURBS-horz1.jpg ) after FEM simulation by ELMERGUI. Therefore, I have tried to create the new NURBS (as ...
- 30 Sep 2018, 09:47
- Forum: ElmerGUI
- Topic: How to Averaging the Nodal Results
- Replies: 7
- Views: 5081
Re: How to Averaging the Nodal Results
Dear Matthias,
Thank you very much for the kind suggestion^^
U helped me again
Kanito
Thank you very much for the kind suggestion^^
U helped me again
Kanito
- 28 Sep 2018, 05:58
- Forum: ElmerGUI
- Topic: How to Averaging the Nodal Results
- Replies: 7
- Views: 5081
Re: How to Averaging the Nodal Results
Hello Matthias, Thank you very much for your suggestion. I am so sorry maybe I cannot answer for your question, I don't know much in detail about the command. I use my colleague's .sif file, and just change for some parameter for my self. Therefore, I am not sure about the time step that I used. Act...
- 27 Sep 2018, 09:45
- Forum: ElmerGUI
- Topic: How to Averaging the Nodal Results
- Replies: 7
- Views: 5081
Re: How to Averaging the Nodal Results
Hi Matthias I have tried to use savescalar as your suggestion, but I do not quite understand the manual that much. Could you please suggest me for the below question? First, I want to find the average the electric field on the boundary 6 (at this boundary, I did not set any parameter. I just want to...
- 25 Sep 2018, 15:58
- Forum: ElmerGUI
- Topic: How to Averaging the Nodal Results
- Replies: 7
- Views: 5081
Re: How to Averaging the Nodal Results
Hi Matthias,
Thank you very much for your help.
I ll try for it.
Thank you,
Kanito
Thank you very much for your help.
I ll try for it.
Thank you,
Kanito
- 24 Sep 2018, 18:00
- Forum: ElmerGUI
- Topic: How to Averaging the Nodal Results
- Replies: 7
- Views: 5081
How to Averaging the Nodal Results
Hi every one, I would like to ask you for a suggestion about calculation of the Averaging the Nodal Results, in my case is Electric field. Now, I have already known that which nodes are on the boundary (single line), but I want to know the average electric field on the boundary of the model. Could y...
- 12 Jun 2018, 19:01
- Forum: ElmerGUI
- Topic: Old Elmer project can not be opened
- Replies: 9
- Views: 7086
Re: Old Elmer project can not be opened
Hello, Matthias Thank you for your reply. All the setting of solvers, materials, boundary conditions and equations is disappear in the setting tool bar of ElmerGUI. I loaded the project without any change and use the exact same mesh. Today, I tried to save the new project from another computer, and ...
- 12 Jun 2018, 09:44
- Forum: ElmerGUI
- Topic: Old Elmer project can not be opened
- Replies: 9
- Views: 7086
Re: Old Elmer project can not be opened
Thank you very much for your reply, and sorry for my late response. All the setting in Elmers is still the same, it was saved in the .sif file. However, all the setting does not show in the setting tool bar (see the attached figures) as it should appear if we load the project. Is there any solution ...
- 28 May 2018, 08:27
- Forum: ElmerGUI
- Topic: Old Elmer project can not be opened
- Replies: 9
- Views: 7086
Re: Old Elmer project can not be opened
Hi every one, I also have the same problem. For me, my colleague had created project file in Windows from my old PC. But when I load the same project in my new PC with the same operating system, all the previous configuration setting is not shown in the ELMERGUI toolbar. Sine I have several project ...