Search found 1914 matches

by mzenker
Yesterday, 10:33
Forum: ElmerSolver
Topic: CoilSolver: Unlisted keywords
Replies: 7
Views: 52

Re: CoilSolver: Unlisted keywords

You would have to check in CoilSolver.src (or CoilSolver.f90) in the Elmer sources.

Matthias
by mzenker
25 Jun 2019, 13:55
Forum: ElmerGUI
Topic: Simulation with high aspect ratio (long pipe)
Replies: 4
Views: 34

Re: Simulation with high aspect ratio (long pipe)

The first source of information about such things is the Models Manual. Have a look at the chapter on Advection/Diffusion. You can also search the manual...

HTH,
Matthias
by mzenker
25 Jun 2019, 12:18
Forum: ElmerSolver
Topic: CoilSolver: Unlisted keywords
Replies: 7
Views: 52

Re: CoilSolver: Unlisted keywords

Since the warning occurs even though the type has been given in the sif, I suspect a typo somewhere...
by mzenker
25 Jun 2019, 10:19
Forum: General
Topic: Turek Hron Benchmark case in Elmer (both CFD and CSM)
Replies: 5
Views: 50

Re: Turek Hron Benchmark case in Elmer (both CFD and CSM)

Hi,

I don't know anything about the Turek Hron Benchmark.
Coupling of Elmer and OpenFoam is possible, see viewtopic.php?f=9&t=5260&p=18382 and viewtopic.php?f=3&t=4999&p=18414.

HTH,
Matthias
by mzenker
25 Jun 2019, 10:15
Forum: ElmerSolver
Topic: Interpolation onto reference grid
Replies: 9
Views: 3981

Re: Interpolation onto reference grid

Hi,

you might also try to do it in ParaView. I am almost sure one of their filters does that. If not, you might search their mailing list and forum or ask there for support. This might be easier than to do it in Elmer.

HTH,
Matthias
by mzenker
25 Jun 2019, 10:12
Forum: ElmerGUI
Topic: Simulation with high aspect ratio (long pipe)
Replies: 4
Views: 34

Re: Simulation with high aspect ratio (long pipe)

Hi, AFAIK anisotropy is possible in Elmer. I have never used it myself. You might search the forum and the Models manual, or wait for an answer from someone else who knows more. ;) For a mesh with a high aspect ratio, you might ask on the gmsh mailing list (maybe after a search in their archive, I t...
by mzenker
25 Jun 2019, 10:04
Forum: ElmerGUI
Topic: Unit conversion
Replies: 2
Views: 28

Re: Unit conversion

Hi, AFAIK there is no such thing as a "unit switch" in Elmer. If you REALLY want to use non-SI units (mostly for lengths, I assume), you have to define your geometry in your unit system and convert all material constants accordingly. Also the Constants block in Model->Setup might need to be changed....
by mzenker
24 Jun 2019, 18:27
Forum: ElmerSolver
Topic: CoilSolver: Unlisted keywords
Replies: 7
Views: 52

Re: CoilSolver: Unlisted keywords

Hmmm, you could have a look into the code, maybe a typo somewhere...?

HTH,
Matthias
by mzenker
24 Jun 2019, 10:50
Forum: General
Topic: Turek Hron Benchmark case in Elmer (both CFD and CSM)
Replies: 5
Views: 50

Re: Turek Hron Benchmark case in Elmer (both CFD and CSM)

Duplicate of viewtopic.php?f=7&t=5390#p21003.
Please don't post the same question twice.

Matthias