Header CHECK KEYWORDS Warn Mesh DB "." "." Include Path "" Results Directory "" End Simulation Max Output Level = 5 Coordinate System = Cartesian Coordinate Mapping(3) = 1 2 3 Simulation Type = Steady state Steady State Max Iterations = 1 Output Intervals = 1 Timestepping Method = BDF BDF Order = 2 Solver Input File = case.sif Post File = case.vtu End Constants Gravity(4) = 0 -1 0 9.82 Stefan Boltzmann = 5.67e-08 Permittivity of Vacuum = 8.8542e-12 Boltzmann Constant = 1.3807e-23 Unit Charge = 1.602e-19 End Body 1 Target Bodies(1) = 2 Name = "Body 1" Equation = 1 Material = 1 Body Force = 1 End Body 2 Target Bodies(1) = 1 Name = "Body 2" Equation = 1 Material = 1 Body Force = 1 End Body 3 Target Bodies(1) = 3 Name = "Body 3" Equation = 1 Material = 1 End Solver 1 Equation = Shell Equations Procedure = "ShellSolver" "ShellSolver" Large Deflection = True Displace mesh = True Exec Solver = Always Stabilize = True Bubbles = False Lumped Mass Matrix = False Optimize Bandwidth = True Steady State Convergence Tolerance = 1.0e-5 Nonlinear System Convergence Tolerance = 1.0e-7 Nonlinear System Max Iterations = 20 Nonlinear System Newton After Iterations = 3 Nonlinear System Newton After Tolerance = 1.0e-3 Nonlinear System Relaxation Factor = 1 Linear System Solver = Iterative Linear System Iterative Method = BiCGStab Linear System Max Iterations = 500 Linear System Convergence Tolerance = 1.0e-10 BiCGstabl polynomial degree = 2 Linear System Preconditioning = ILU0 Linear System ILUT Tolerance = 1.0e-3 Linear System Abort Not Converged = False Linear System Residual Output = 10 Linear System Precondition Recompute = 1 End Equation 1 Name = "Equation 1" Active Solvers(1) = 1 End Material 1 Name = "Material 1" Poisson ratio = .23 Youngs modulus = 1.04E7 Shell Thickness = 0.09375 End Body Force 1 Name = "BodyForce 1" Normal Pressure = Variable Time Real MATC "-20/10.0 * tx(0)" End Boundary Condition 1 Target Boundaries(1) = 4 Name = "left" U 1 = Real 0 U 3 = Real 0 End Boundary Condition 2 Target Boundaries(1) = 1 Name = "right" U 3 = Real 0 End Boundary Condition 3 Target Boundaries(1) = 2 Name = "y" U 2 = Real 0 End