Header CHECK KEYWORDS Warn Mesh DB "." "." Include Path "" Results Directory "" End Simulation Max Output Level = 5 Coordinate System = Cartesian Coordinate Mapping(3) = 1 2 3 Simulation Type = Transient Steady State Max Iterations = 1 Output Intervals = 72 Timestepping Method = BDF BDF Order = 1 Timestep intervals = 72 Timestep Sizes = 100 Solver Input File = case.sif Post File = case.ep End Constants Gravity(4) = 0 -1 0 9.82 Stefan Boltzmann = 5.67e-08 Permittivity of Vacuum = 8.8542e-12 Boltzmann Constant = 1.3807e-23 Unit Charge = 1.602e-19 End Body 1 Target Bodies(1) = 1 Name = "Body 1" Equation = 1 Material = 1 Initial condition = 1 End Solver 2 Equation = Heat and Moisture Transport Procedure = "HeatMoistureSolve" "HeatMoistureSolver" Variable = StateVariables[Temperature:1 Humidity:1] Exec Solver = Always Stabilize = True Bubbles = False Lumped Mass Matrix = False Optimize Bandwidth = True Steady State Convergence Tolerance = 1.0e-5 Nonlinear System Convergence Tolerance = 1.0e-4 Nonlinear System Max Iterations = 50 Nonlinear System Newton After Iterations = 1 Nonlinear System Newton After Tolerance = 1.0e-2 Nonlinear System Relaxation Factor = 1 Linear System Solver = Iterative Linear System Iterative Method = BiCGStab Linear System Max Iterations = 500 Linear System Convergence Tolerance = 1.0e-10 BiCGstabl polynomial degree = 2 Linear System Preconditioning = Diagonal Linear System ILUT Tolerance = 1.0e-3 Linear System Abort Not Converged = False Linear System Residual Output = 1 Linear System Precondition Recompute = 1 End Solver 1 Equation = Result Output Procedure = "ResultOutputSolve" "ResultOutputSolver" Output File Name = caseGMSH Output Format = Gmsh Exec Solver = Always End Equation 1 Name = "równ.niest.przepł.ciepła" Active Solvers(1) = 2 End Equation 2 Name = "zapisGMSH" Active Solvers(1) = 1 End Material 1 Name = "beton" Heat Conductivity = Variable Temperature;Real MATC "1.36-0.136*((tx-273.15)/100)+0.0057*((tx-273.15)/100)*((tx-273.15)/100)'' Heat Capacity = Variable Temperature;Real;273.15 900;368.15 900;378.15 1470;388.15 1470;473.15 1000;673.15 1100;1473.15 1100;End Density = Variable Temperature;Real;293.15 2300;388.15 2300;398.15 2295;408.15 2289;473.15 2254;483.15 2250;673.15 2185;683.15 2183;1373.15 2044;1473.15 2024;End End Initial Condition 1 Name = "temp.pocz.pokojowa" Temperature = Real 293.15 Humidity = Real 293.15 End Boundary Condition 1 Target Boundaries(2) = 3 4 Name = "str.konw.rad" Heat Transfer Coefficient = 25.0 Radiation = Idealized External Temperature = Variable Time;Real MATC "273.15 + 20 + 345*log(8.0*tx/60 + 1)" Emissivity = 0.7 Humidity = Variable Time; Real MATC "273.15 + 20 + 345*log(8.0*tx/60 + 1)" End